1175Ah LFP Battery Cell: Specifications, Applications, and Buyer Guide

A 1175Ah LFP battery cell is a lithium iron phosphate cell rated for a nominal capacity of 1,175 ampere-hours. Its large capacity may suit stationary energy storage projects that need to store substantial energy in fewer individual cells, but capacity alone does not determine whether it fits a system. Buyers should verify the manufacturer’s datasheet for voltage, dimensions, mass, current limits, operating conditions, cycle-life criteria, and integration requirements before making a selection. At HiTHIUM, we recommend evaluating the cell as part of the complete battery system and confirming project-specific requirements with the supplier.

Check now

Who This Guide Is For

This guide is for energy storage developers, system integrators, EPC contractors, procurement teams, and other B2B buyers evaluating large-format LFP cells. It is intended to help readers create a technical and commercial checklist before requesting quotations or comparing suppliers. It does not replace the exact cell datasheet, system design review, or applicable project requirements. Specifications and availability should be confirmed for the specific product under consideration.

What a 1175Ah LFP Cell Is

Capacity and energy are different measures

Ampere-hour capacity describes the charge a cell can deliver under specified test conditions; it is not itself a measure of energy. Energy depends on both capacity and voltage, and the usable energy of a finished battery system also depends on operating limits, configuration, and system losses. For illustration only, multiplying 1,175Ah by an assumed nominal voltage of 3.2V gives approximately 3.76kWh per cell. The 3.2V value is a calculation assumption, not a confirmed specification for a particular 1175Ah cell; use the manufacturer’s rated voltage and test conditions for project calculations.

LFP chemistry and cell integration

LFP is an abbreviation for lithium iron phosphate, a lithium-ion battery chemistry used in stationary storage and other applications. A cell is only one component in a complete system: modules or racks, electrical connections, a battery management system, thermal management, protection equipment, and controls all affect the final design. A high-capacity cell may reduce the number of cells required for a target capacity, but it does not automatically reduce total system cost or simplify every installation. The outcome depends on cell design, system architecture, safety engineering, and project constraints.

Specifications Buyers Should Review

Do not compare cells using capacity alone. Ask suppliers to provide a current, product-specific datasheet and clarify the conditions behind each rating, including temperature, charge and discharge procedure, and end-of-life criteria. Check that the information is relevant to the intended configuration and that test limits are clearly distinguished from recommended operating limits.

• Electrical ratings: Confirm rated capacity, nominal voltage, charge and discharge voltage limits, recommended current range, and any permitted pulse-current limits.
• Physical details: Review dimensions, mass, terminal design, orientation requirements, and handling instructions to check fit and installation logistics.
• Performance conditions: Ask how capacity, efficiency, and cycle-life figures were measured, and identify any conditions that differ from the project’s expected operation.
• Operating environment: Verify allowable charging, discharging, storage, and transport conditions from the supplier’s documentation.
• Integration information: Confirm monitoring needs, cell balancing approach, protection requirements, and compatibility with the planned battery management and thermal systems.
• Quality and documentation: Request applicable product documentation, traceability information, inspection procedures, and any compliance documents relevant to the destination market.

Applications and Cell-to-System Matching

Large-capacity LFP cells may be considered for stationary energy storage where the system designer is targeting a high energy capacity and has the engineering capability to integrate large-format cells. Potential project categories include grid-connected storage, renewable energy storage, and commercial or industrial energy storage. Suitability depends on the complete system design, project duty cycle, site conditions, safety requirements, and applicable regulations. A cell’s capacity rating by itself does not establish that it is suitable for any particular use case.

Match the cell to the project profile

Start by defining the project’s required power, energy, duration, operating schedule, and expected environmental conditions. Then check how the proposed cell and system configuration meet those requirements within the supplier’s documented limits. Ask the integrator to explain how the cell arrangement, electrical protection, thermal management, and controls work together. If the design depends on frequent cycling, high power, or demanding ambient conditions, request evidence that the proposed configuration has been evaluated for those conditions.

HiTHIUM Product Page

A Practical Buyer Selection Framework

1. Write a project specification. Document target energy and power, operating profile, installation environment, system interface, delivery location, and required documentation before requesting offers.
2. Check the technical fit. Compare the supplier’s rated values and operating limits with the project requirements, and resolve any gaps with the engineering team.
3. Assess system integration. Confirm the proposed cell configuration, battery management approach, protection design, thermal strategy, and responsibilities for commissioning support.
4. Evaluate quality evidence. Ask about production controls, inspection points, traceability, packaging, and the documents supplied with each order. Evaluate evidence rather than relying on general claims.
5. Compare the complete offer. Consider cell price alongside logistics, integration work, warranty terms, service scope, and project-specific risks.
6. Confirm the supply plan. Align the quotation, samples or evaluation process where available, production schedule, shipping terms, and delivery milestones before committing.

Questions to resolve before approval

Ask whether the quoted cell is a standard product or a configuration requiring project-specific review. Confirm what is included in the commercial offer and which services, documents, or integration responsibilities are excluded. Request written clarification for any value that is not stated in the datasheet, and make sure the engineering team has reviewed the final revision. These checks help reduce the risk of comparing non-equivalent offers.

Pricing, MOQ, and Lead Time

Pricing for a 1175Ah LFP cell cannot be reliably estimated from capacity alone. It may depend on order volume, specification, commercial terms, packaging, destination, logistics, and the supplier’s current production plan. Minimum order quantity and lead time should be confirmed directly in a project-specific quotation rather than assumed from a general product description. When requesting pricing, provide the required quantity, destination, target delivery window, and technical scope so suppliers can respond on a comparable basis.

For a fair comparison, ask each supplier to state the quotation validity period, currency, delivery terms, payment conditions, included documentation, and any sample or qualification arrangements. Compare total procurement and integration costs, not just the unit price. Where timing is critical, ask for milestone dates and clarify which events may affect the schedule. Avoid treating an indicative production estimate as a confirmed shipment date.

Supplier Evaluation Checklist

• Can the supplier provide a current datasheet for the exact cell being offered?
• Are ratings and test conditions clearly stated and suitable for technical comparison?
• Can the supplier explain traceability, inspection, packaging, and handling processes?
• Are product documentation and any destination-market requirements addressed?
• Is the division of responsibility for system integration and technical support clear?
• Are price, MOQ, lead time, delivery terms, and quotation assumptions documented?

At HiTHIUM, we encourage buyers to share their application, system requirements, target volume, and delivery region when discussing a 1175Ah LFP cell project. This allows the technical and commercial discussion to focus on the information needed to assess fit and define the next steps. Buyers should request the applicable product documentation and confirm that the proposed cell aligns with their system design before purchase. Final specifications, availability, and supply terms should be confirmed directly with the supplier.

Key Takeaways and Next Steps

A 1175Ah rating indicates high cell capacity, but it does not by itself confirm energy, performance, safety, system compatibility, or project economics. For a simple illustration, 1,175Ah multiplied by an assumed 3.2V gives 3.76kWh; the actual rated voltage and usable energy must come from the product datasheet and system design. Buyers should compare documented specifications, integration needs, quality evidence, and complete commercial terms before choosing a supplier.

The next step is to prepare a project brief with required power and energy, operating profile, site conditions, quantity, and delivery expectations. Send it to potential suppliers and request the current datasheet, quotation assumptions, supply schedule, and relevant documentation. HiTHIUM can discuss project requirements and help buyers identify the information needed to evaluate whether a 1175Ah LFP cell is appropriate for their application.

Contact us to discuss your requirements of 1175Ah LFP Battery Cell. Our experienced sales team can help you identify the options that best suit your needs.