DIN EN 853 2SN Hydraulic Hoses: Specifications, Applications, and Selection Guide

DIN EN 853 2SN is a high-pressure hydraulic hose specification for hoses reinforced with two layers of braided steel wire. It is commonly used to convey hydraulic fluids in equipment where pressure, movement, and working conditions require a flexible connection. When selecting a 2SN hose, match its size, pressure rating, temperature range, fluid compatibility, and fittings to the actual system requirements. We recommend confirming the exact product data sheet and applicable standard edition before placing an order, because ratings vary by hose size and construction.

View Details

Key Takeaways

• 2SN identifies a hose construction with two braided steel-wire reinforcement layers; it does not mean that every size has the same pressure rating.
• DIN EN 853 2SN hoses are generally offered in nominal bore sizes from 5 mm to 51 mm, with pressure ratings dependent on size.
• For petroleum-based hydraulic fluids, the commonly stated operating temperature range is -40°C to +100°C, subject to the hose manufacturer’s data and fluid conditions.
• Buyers should verify the full assembly, including hose, fittings, crimping specifications, and operating conditions—not just the hose designation.

Who This Guide Is For

This guide is intended for procurement teams, hydraulic system designers, maintenance professionals, and distributors evaluating DIN EN 853 2SN hydraulic hoses. It provides a practical overview of construction, specification checks, application matching, and supplier evaluation. It is not a substitute for the equipment manufacturer’s requirements or a product-specific technical data sheet. If a system has unusual pressure pulses, chemical exposure, or temperature conditions, request a technical review before selecting a hose.

What Is a DIN EN 853 2SN Hydraulic Hose?

DIN EN 853 2SN is a designation for a wire-braided hydraulic hose type. Its typical construction consists of an oil-resistant synthetic rubber inner tube, two high-tensile steel-wire braid reinforcement layers, and a synthetic rubber outer cover. The inner tube carries the fluid, the wire reinforcement supports pressure, and the cover helps protect the assembly from external exposure. Exact compounds and construction details should be confirmed against the supplier’s specification.

Core Function and Construction

The two braided reinforcement layers are designed for hydraulic applications requiring higher pressure capability than many single-wire-braid hose types. The hose must still be selected according to its nominal bore and the rated working pressure for that size. A 2SN designation alone does not provide enough information to establish whether a hose is suitable for a particular circuit. The assembly’s fittings and installation also affect safe operation.

Key Specifications to Check

Common 2SN product ranges cover nominal bores from 5 mm to 51 mm. For petroleum-based hydraulic fluids, manufacturers commonly specify a temperature range of -40°C to +100°C, but operating limits can differ with fluid type, exposure, and product design. Pressure ratings vary by size, so buyers should use the pressure value for the exact bore rather than assume one rating applies across the range. Also confirm outside diameter, minimum bend radius, impulse requirements where relevant, and the required fitting standard.

Applications and Material Considerations

DIN EN 853 2SN hoses are used in hydraulic circuits for machinery and mobile equipment, including construction, agricultural, material-handling, and industrial systems. Typical connection points include hydraulic power units, cylinders, pumps, and other components where a flexible line is needed. Suitability depends on the circuit pressure, fluid, temperature, routing, and movement—not simply the industry in which the equipment operates. Always follow the equipment manufacturer’s hose and assembly requirements.

Match the Hose to the Working Environment

For standard petroleum-based hydraulic fluids, the inner tube must be compatible with the specific fluid and additives. If the system uses water-based fluids, biodegradable fluids, or another specialized medium, confirm compatibility with the hose supplier before purchase. The outer cover should also suit expected exposure, such as abrasion, weather, oil, or contact with nearby components. Where the hose will flex repeatedly or pass through a confined route, check the minimum bend radius and avoid twisting during installation.

With competitive price and timely delivery, Hengshui Xinchi Hose Manufacturing Co., Ltd. sincerely hope to be your supplier and partner.

How to Select a 2SN Hose

Step 1: Define Operating Requirements

Record the maximum working pressure, expected pressure surges, operating temperature, fluid type, and ambient conditions. Include the equipment’s duty cycle and any vibration or repeated movement around the hose. If pressure varies over time, do not size the hose using only the normal operating value. Ask the equipment manufacturer or a qualified hydraulic specialist to clarify requirements that are not documented.

Step 2: Confirm Bore, Routing, and Connections

Select a nominal bore that meets the system’s flow requirements and confirm the hose’s dimensions against available routing space. Check the minimum bend radius, hose length, and clearance from hot surfaces or moving parts. Specify fitting type, thread or connection standard, orientation, and assembly length. A correctly specified hose can still fail to fit if end connections or routing details are overlooked.

Step 3: Validate the Complete Assembly

Confirm that the hose, fittings, and assembly method are compatible and rated for the application. Request the size-specific technical data sheet and clarify any requirements for inspection, marking, packaging, or documentation. Where the application is safety-critical or subject to a customer specification, obtain written confirmation of the required construction and acceptance criteria. Do not treat a general product description as proof that a particular assembly meets an unverified requirement.

Common Selection Mistakes

• Using the 2SN label as the only selection criterion: The label does not show whether the hose’s size-specific pressure rating is adequate.
• Ignoring pressure peaks: Transient pressure and operating cycles may affect the suitability of a hose.
• Overlooking fluid compatibility: Confirm the inner tube material is appropriate for the actual fluid and additives.
• Choosing a hose that bends too tightly: Routing below the specified minimum bend radius can compromise service performance.
• Separating hose and fitting decisions: Specify and verify the assembly as a complete component.

Pricing, MOQ, and Lead Time

Pricing for 2SN hose depends on factors such as bore, order quantity, requested length, fittings, packaging, and any documentation or customization requirements. Minimum order quantities and lead times are supplier- and order-specific, so buyers should request a quotation rather than rely on a generic estimate. For a useful quote, provide the required standard, size, working pressure, fluid and temperature conditions, quantity, delivery destination, and whether you need hose only or completed assemblies. Confirm whether quoted lead times cover production, inspection, and dispatch.

Supplier Evaluation Checklist

Before selecting a supplier, check whether it can provide clear product specifications for the exact hose size and construction. Ask how it confirms material and dimensional requirements, what inspection or documentation is available for your order, and whether it can support the fittings or assembly needs. Request clarification whenever a specification or claim is unclear, rather than assuming it applies to all sizes or batches. For repeat purchases, agree on the product identification and order details that will help maintain consistency.

Working with Hengshui Xinchi Hose Manufacturing Co., Ltd.

At Hengshui Xinchi Hose Manufacturing Co., Ltd., we supply rubber hose products for B2B buyers evaluating hydraulic hose options. We can discuss the requested DIN EN 853 2SN size, application conditions, fittings, order quantity, and documentation needs as part of the quotation process. To help us assess your requirement, share the hose bore, pressure and temperature conditions, fluid type, length, connection details, and destination. We can then clarify product availability and the specifications applicable to the requested item.

Conclusion: Make the Selection from Verified Requirements

DIN EN 853 2SN is a two-steel-wire-braid hydraulic hose type used in a range of hydraulic applications, but the designation alone is not a complete selection specification. Choose the hose by confirming its size-specific pressure rating, temperature and fluid compatibility, routing limits, and matching fittings. The next practical step is to compile these requirements and compare them with a supplier’s technical data for the exact product and assembly. Contact Hengshui Xinchi Hose Manufacturing Co., Ltd. with your application details to discuss a suitable quotation and product evaluation.

For more DIN EN853 2SN Hydraulic Hosesinformation, please contact us. We will provide professional answers.