FLC500 Flat Shaker Screens: Specifications, Compatibility, and Selection Guide

FLC500 flat shaker screens are replacement screening panels selected to fit a particular shale shaker configuration and drilling-fluid separation requirement. The name alone is not enough to confirm compatibility: buyers should verify the shaker make and model, panel dimensions, fastening arrangement, and required mesh or aperture before ordering. At Yuanpeng, we recommend matching the screen to both the equipment and the solids-control task, then confirming the final specification with the supplier. This guide explains what to check, how to compare options, and what information to include in a quotation request.

If you are looking for more details, kindly visit our website.

Key Takeaways

• Confirm the exact shaker model and screen interface; do not rely on “FLC500” as the only fitment detail.
• Specify panel dimensions, construction, mesh or aperture, and any required identification or packaging.
• Match the opening and screen construction to the fluid, solids, operating conditions, and process priorities.
• Ask suppliers to confirm compatibility, available options, minimum order quantity, and lead time in writing.

Who This Guide Is For

This guide is for drilling contractors, equipment distributors, purchasing teams, and maintenance personnel sourcing replacement FLC500 flat shaker screens. It is useful when replacing a known screen, comparing suppliers, or investigating a fit or separation issue. If you are buying for an unfamiliar shaker, collect equipment details and photographs before requesting a quotation. That information gives a supplier a more reliable basis for checking the proposed fit.

What an FLC500 Flat Shaker Screen Does

Basic concept and function

A flat shaker screen is a screening panel installed on a shale shaker to separate drilled solids from drilling fluid as the fluid passes through the screen. The panel’s opening and construction influence which solids are retained and how fluid passes through under the actual operating conditions. Screen selection therefore affects more than physical fit: it is also part of the solids-control setup. The correct choice depends on the equipment, fluid, material being screened, and the operator’s process priorities.

Applications and operating context

FLC500-format screens are considered for compatible shaker equipment used in drilling-fluid solids control. Buyers may be replacing worn or damaged panels, standardizing maintenance stock, or assessing a different screening specification for a particular job. Actual performance depends on the screen and the wider operating setup, so a product description alone cannot predict the result in every application. Where the process is sensitive to fluid recovery or solids removal, share those priorities with the supplier before selecting a mesh.

Specifications and Material Options to Confirm

Fitment and construction details

Start with the complete equipment identification, including manufacturer, shaker model, and any model or screen code shown in the equipment documentation. Confirm the panel’s overall length, width, thickness or profile, and the way it seats or locks into the shaker. Screen descriptions such as “flat” can help identify a general format, but they do not replace a dimensional and interface check. If available, provide a drawing, a clear photograph of the installed panel, and measurements of a known-fitting screen.

Mesh specification should also be stated clearly. Buyers may encounter mesh-count descriptions, aperture measurements, or other supplier-specific designations; these are not always directly interchangeable without confirming how the supplier defines them. Ask for the opening specification and construction details, and clarify whether the offered screen matches your required terminology or measurement method. If a coating, support layer, frame material, or other construction feature matters to your operation, include it in the request rather than assuming it is standard.

Illustrative specification format—not an FLC500 product specification

A useful way to communicate a requirement is to list each measurement with its unit. For example, a hypothetical request could state a panel length of 1,000 mm, a width of 500 mm, and a nominal opening of 0.20 mm. These figures illustrate the format only; they are not confirmed FLC500 dimensions or a recommendation for a particular shaker. Replace them with measurements and process requirements verified for your equipment.

How to Check Compatibility

A practical verification process

1. Identify the equipment: Record the shaker manufacturer, exact model, serial or configuration details where available, and the existing screen code.
2. Measure the panel: Record the overall dimensions and profile, then note locating features such as edges, supports, hooks, or locking points. Measure more than one existing panel if sizes appear inconsistent.
3. Describe the screening requirement: State the desired mesh or aperture, drilling-fluid context, and the operational objective, such as prioritizing solids removal or fluid throughput.
4. Request written confirmation: Ask the supplier to confirm the model and interface match, offered construction, and any differences from the sample or drawing you provided.
5. Check the first delivery: Before installation, compare the received panels with the approved specification and inspect the fit and condition.

Compatibility should be treated as a verified match, not inferred from a product name. A panel can share a general designation yet differ in dimensions, support arrangement, or locking details. If the original screen is unavailable, use equipment documentation and measured interface information, and ask the supplier to identify any remaining uncertainty. Do not modify a panel to force a fit without approval from the responsible equipment or maintenance team.

Link to Yuanpeng

Selection Framework for Buyers

Match the screen to the job

First define the task: replacing an established specification, addressing a recurring maintenance concern, or evaluating another screening option. For a direct replacement, the priority is to reproduce the verified fit and existing specification. For a process change, discuss the fluid and solids conditions with the supplier and make one clearly documented change at a time where practical. This helps your team compare observations without confusing fitment changes with screening changes.

Next, compare construction and opening information consistently across quotations. Ask each supplier to identify the offered screen type, dimensions, mesh or aperture basis, and material or support details relevant to your request. If a supplier uses a proprietary designation, request its definition and confirmation of equivalence rather than assuming that similarly named products are identical. Record the approved specification so purchasing and maintenance teams can reorder against the same information.

Pricing, minimum order quantity, and lead time

Screen pricing can depend on the requested dimensions, construction, order quantity, packaging, and delivery requirements. Minimum order quantities and lead times are supplier- and order-specific, so they should be requested for the exact specification and destination rather than assumed from a general product listing. For planned maintenance, ask about availability and production timing early enough to coordinate procurement with the replacement schedule. Compare quotations on a like-for-like basis, including freight terms and any requested inspection or documentation.

Supplier Evaluation Checklist

A capable supplier should be able to discuss fitment details and explain what information is still needed before confirming an order. Ask how the supplier checks a replacement against the equipment model, drawing, or sample you provide. Confirm that the quotation clearly states the specification, quantity, packaging, delivery terms, and any agreed inspection requirements. If a detail cannot be confirmed, ask for it to be marked as pending rather than treated as settled.

• Can the supplier confirm compatibility using the exact shaker model and panel information?
• Are dimensions, interface details, and mesh or aperture clearly documented?
• Does the quotation identify the offered construction and any deviations from your request?
• Are minimum order quantity, lead time, and shipping terms specific to your order?
• Can the supplier support repeat orders using an agreed specification record?

Common Selection Mistakes

A frequent mistake is ordering by the FLC500 label alone without checking the actual panel interface. Another is comparing mesh-count descriptions from different suppliers as if the numbers necessarily represent identical openings or constructions. Buyers can also overlook the difference between a confirmed specification and a suggested alternative. Avoid these issues by sharing measurements, asking for written confirmation, and reviewing the order details before production or shipment.

Work with Yuanpeng on Your Screen Requirement

At Yuanpeng, we support B2B buyers evaluating replacement wire mesh screens by reviewing the equipment identification, dimensions, screening requirement, and requested order details. To help us assess an FLC500 flat shaker screen inquiry, provide the shaker make and model, a panel photograph or drawing, measured dimensions, the current mesh or aperture specification, and your quantity and destination. We can then discuss the information needed to confirm a suitable offer, along with availability, minimum order quantity, and lead time for the requested configuration. Final compatibility should be approved against your equipment and the written order specification.

Conclusion

The right FLC500 flat shaker screen is one that is verified for the shaker interface and specified for the intended screening task; the designation by itself does not establish either. Begin by documenting the equipment model, panel dimensions, fastening details, and required mesh or aperture, then ask suppliers to confirm the proposed configuration in writing. Compare pricing and delivery only after the technical details are clear. Send Yuanpeng your equipment information and screen requirements to start a focused quotation discussion.